Our DNA: using resources consciously
Our conviction: the best energy is the energy you don’t use at all!
AT: PU-DD-100, PU-DD-150 | DE: DEO ds, DAA ds
The insulation board is used in flat roofs. It consists of rigid PU foam (polyurethane) with diffusion-tight aluminum facing on both sides and offers the best insulation properties of 0.022/0.023 W(m.K).

Rigid polyurethane foam, closed-cell
textured pure aluminum foil, on both sides
Roofs with membrane or bitumen waterproofing (with or without gravel ballast)
< 80 mm: 0.023 W/(m.K) ≥ 80 mm: 0.022 W/(m.K)
straight butt edge; tongue and groove available at extra cost; other thicknesses on request
in bundles in PE film
| Element thickness mm | Thermal resistance ¹⁾ m²K/W | Thermal transmittance ²⁾ W/m²K |
|---|---|---|
| 20 | 0,85 | 0,98 |
| 30 | 1,30 | 0,68 |
| 40 | 1,70 | 0,53 |
| 50 | 2,15 | 0,43 |
| 60 | 2,60 | 0,36 |
| 70 | 3,00 | 0,32 |
| 80 | 3,60 | 0,27 |
| 100 | 4,50 | 0,21 |
| 120 | 5,45 | 0,18 |
| 140 | 6,35 | 0,15 |
| 160 | 7,25 | 0,13 |
| 180 | 8,15 | 0,12 |
| 200 | 9,05 | 0,11 |
¹⁾ calculated with λD, rounded according to EN 13163
²⁾ calculated with λD, surface heat transfer resistances acc. to ÖN B 8110-2 included
More products: