Our DNA: using resources consciously
Our conviction: the best energy is the energy you don’t use at all!
AT: EPS-W 30 | DE: DEO dh, DAA dh, DAD, WAB
The thermal insulation board for warm roofs made of gray polystyrene rigid foam (EPS) with infrared reflectors for lower insulation thicknesses at the same U-value.
expanded polystyrene rigid foam with infrared reflectors
Thermal insulation under load – flat roofs, screeds, underfloor heating, cold storage rooms
0.030 W/mK
straight butt edge; shiplap or tongue and groove available at extra cost up to 200mm; tapered boards on request
in bundles in PE film
| Element thickness mm | Thermal resistance ¹⁾ m²K/W | Thermal transmittance ²⁾ W/m²K |
|---|---|---|
| 80 | 2,65 | 0,35 |
| 100 | 3,30 | 0,29 |
| 110 | 3,65 | 0,26 |
| 120 | 4,00 | 0,24 |
| 130 | 4,30 | 0,22 |
| 140 | 4,65 | 0,21 |
| 150 | 5,00 | 0,19 |
| 160 | 5,35 | 0,18 |
| 180 | 6,00 | 0,16 |
| 200 | 6,65 | 0,15 |
| 220 | 7,35 | 0,13 |
| 240 | 8,00 | 0,12 |
| 260 | 8,65 | 0,11 |
| 280 | 9,35 | 0,11 |
| 300 | 10,00 | 0,10 |
¹⁾ calculated with λD, rounded according to EN 13163
²⁾ calculated with λD, surface heat transfer resistances acc. to ÖN B 8110-2 included
More products: