Austria’s First Manufacturer of EPS-F plus Products with the Ecolabel
Steinbacher is Austria’s only manufacturer of EPS-F products with the Ecolabel. This makes higher subsidies possible.
AT: EPS-F
The facade insulation with the Austrian Ecolabel made of gray polystyrene rigid foam (Styrofoam) with infrared reflectors for lower insulation thicknesses compared to white EPS facade insulation boards. With the Ecolabel, higher subsidies are possible, for example in Tyrol under the housing subsidy scheme.

expanded polystyrene rigid foam with infrared reflectors
straight butt edge
0,031 W/(m.K)
Facade insulation, external thermal insulation composite system according to ETAG 004
in bundles in PE film
| Element thickness mm | Thermal resistance ¹⁾ m²K/W | Thermal transmittance ²⁾ W/m²K |
|---|---|---|
| 20 | 0,60 | 1,30 |
| 30 | 0,95 | 0,89 |
| 40 | 1,25 | 0,70 |
| 50 | 1,60 | 0,56 |
| 60 | 1,90 | 0,48 |
| 70 | 2,25 | 0,41 |
| 80 | 2,55 | 0,37 |
| 90 | 2,90 | 0,33 |
¹⁾ calculated with λD, rounded according to EN 13163
²⁾ calculated with λD, surface heat transfer resistances acc. to ÖN B 8110-2 included
Vom Sichtbaren zum Unsichtbaren. Von der Gebäudeplanung zur Dämmung.
Steinbacher is Austria’s only manufacturer of EPS-F products with the Ecolabel. This makes higher subsidies possible.
EPS plus impresses thanks to infrared absorbers, which reduce the passage of thermal radiation so that the desired insulation performance is achieved with an insulation layer that is up to 25% thinner (compared to white EPS). As a result, even in the tightest of spaces it achieves insulation values that meet all the requirements of modern house building.
More products: