Moisture Protection

Moisture Protection

One of the most important goals of building is to have dry homes. 

Moisture on walls and ceilings leads to mold and other fungal growth, which is not only unsightly but also harmful to health – because of the fungal spores, which can cause allergic diseases of the respiratory tract. So if the external components of a building are damp, a comfortable indoor climate cannot be achieved even with heating. In addition, heating such rooms requires increased energy input because the thermal insulation of the external components is reduced by the moisture. For these reasons, care must be taken as early as the design and construction of buildings, but especially also when the homes are in use, to ensure that the goal of the “dry home” is achieved and maintained in the long term – we offer the optimal insulation for this. Prolonged dampness can also shorten the service life of various building materials. Depending on the material, rot and corrosion can lead to decomposition. Frost can even cause the material structure to burst.

In structural moisture protection, there are various types of moisture exposure, with external components often even being stressed more by moisture coming from inside than by external influences such as rain or snow. Acting from outside: rain, snow, water, humid outside air. Acting from inside: water vapor (from housekeeping, personal hygiene, moisture given off by the occupants), condensation on the surfaces or inside the components, moisture from new construction, possibly cleaning water.

In recent years, growing environmental and health awareness on the part of planners and building owners has led to the demand for a “healthy indoor climate”. Importance is attached to walls (and also roof build-ups) that can “breathe”. The fact is, however, that air exchange through solid building materials naturally cannot take place.

Moisture protection for the roof

To limit leaks and thus prevent moisture damage and energy losses, there is probably only one effective method: carefully applied, practically airtight sealing of the roof – a windproof layer. This airtightness layer must be fundamentally distinguished from the vapor retarder or vapor barrier, although both functions are actually fulfilled by the same materials. With regard to vapor diffusion, laying the vapor retarder without gaps would not be absolutely necessary, but since this layer should of course be windproof at the same time, it must be made tight and connected airtight at the junctions.

Innovative renovation system for moisture-affected lightweight industrial roofs

With our new warm roof renovation system, warm roofs with, for example, moisture-affected mineral wool or EPS can dry out again. The existing damp insulation stays in place and is dried by a sophisticated ventilation system. In this way, the roof can be renovated quickly and efficiently. 

Any questions?

If you have questions about moisture protection and our constructions, please contact our technical department.

Go to contacts